Executive Board 2022-2023
James P. De Clerck
Dr. James De Clerck is a Professor of Practice in the Mechanical Engineering – Engineering Mechanics Department at Michigan Technological University. He earned BS, MS and PhD degrees from Michigan Tech, receiving his Ph.D. in Engineering Mechanics in 1991.
Prior to joining the Michigan Tech faculty in 2009, Jim was a Project Design Engineer....
Dr. Raman P. Singh serves as the Associate Dean for Engineering at OSU-Tulsa and as the Head of the School of Materials Science and Engineering in the College of Engineering, Architecture and Technology at Oklahoma State University (OSU). He also serves as the Director of the Helmerich Advanced Technology Research Center on the OSU-Tulsa campus and is appointed as the Helmerich Family Endowed Chair Professor of Engineering,...
Dr. Blough received his BSME and MSME from Michigan Technological University. Dr. Blough attended the University of Cincinnati to obtain his Ph.D. in structural dynamics. Dr. Blough’s Ph.D. was on rotating machinery signal processing methods. Dr. Blough is currently a Professor in the Mechanical Engineering-Engineering Mechanics Department at Michigan Technological University. Dr. Blough has been active in SEM and IMAC for over 20 years....
Dr. Rogers received his B.S., M.S. and Ph.D. degrees in Engineering Mechanics from Iowa State University in 1980, 1984 and 1986, respectively. Jon joined Sandia in the fall of 1986 in the Vibration Testing Division. In the test organization, he worked as the test engineer for vibration and shock testing on a number of systems. Jon was the project leader for the VIBRAFUGE development project which placed a 4000 lb force rated shaker on the 29-foot...
Dr. Zimmerman became a member of the Society for Experimental Mechanics (SEM) in 1988. She was the inaugural Student Paper Competition Winner under the guidance of Professor Gary Cloud at Michigan State University in 1990; Chair of the Education Committee from 1991-2007; Associate Editor of Experimental Techniques from 1996-today, and Senior Editor from 2000-2007; President from 2008-2009; Assistant Treasurer 2012-2013 and...
EXECUTIVE DIRECTOR / SECRETARY
Nuno Lopes is the Executive Director/Secretary of the Society for Experimental Mechanics where he is responsible for day-to-day operations including the Society’s three archival peer-reviewed journals. Nuno oversees staff and reports to the Executive Board. He has been with SEM since 2013.
His 14 years at IBM provided experience working with executives and leading a team. Nuno...Read More
Eric N. Brown
Dr. Eric N. Brown is the Division Leader for the Explosive Science and Shock Physics Division at Los Alamos National Laboratory where he oversees the premier research program on energetic materials and dynamic material response in support of National Security. His research has spanned fracture and damage of complex heterogeneous polymers and polymer composites for energetic, reactive, and structural applications including crystalline phase...
Daniel Rixen, born in 1967, received his engineering degree in Electromechanics and doctoral degree in Applied Sciences from the University of Liège (Belgium), at the Laboratoire de Techniques Aéronautiques et Spatiales (LTAS). He also holds a master degree in Aerospace Vehicle Design from the College of Aeronautics in Cranfield (UK). After a post-doctoral stay at the University of Colorado (Center for Aerospace Structures), he was...
Jacob Dodson is senior research mechanical engineer and research team lead at the Munitions Directorate, Air Force Research Laboratory at Eglin Air Force Base, Florida. He has been at AFRL since starting in 2012. Jacob Dodson earned B.S degrees in Mechanical Engineering and Mathematics (2007) from Virginia Commonwealth University, a M.S. in Mathematics (2010) and a Ph.D. degree in Mechanical Engineering (2012) from...
David Epp is currently the Reactor Facility Development manager at Sandia National Laboratory. He received his B.S., M.S. and Ph.D. degree in Mechanical Engineering from University of Oklahoma in 1997, 2001 and 2002, respectively with a focus on dynamics and controls. David joined Sandia in 2002 and has held a variety of positions as a staff member, including a test engineer, experimental facility owner, principle investigator, and...
Leslie Lamberson is an Associate Professor in Mechanical Engineering with affiliation in Materials Science at the Colorado School of Mines. Her area of expertise is in mechanics of materials under extreme conditions. She earned her B.S. in Aerospace Engineering and B.A. in Dance Performance from the University of Michigan, her M.S. in Aerospace Engineering from the Georgia Institute of Technology, and her Ph.D. in Aeronautics from the...
M. Taher A. Saif
Dr Saif is the Edward William and Jane Marr Gutgsell Professor of Mechanical Science and Engineering, University of Illoinois at Urbana Champaign. Dr Taher Saif received his BS and MS degrees in Civil Engineering from Bangladesh University of Engineering and Technology and Washington State University respectively in 1984 and 1986. He obtained his Ph.D degree in Theoretical and Applied Mechanics from Cornell University in 1993. He worked as....
Dario Di Maio
I have graduated in Mechanical Engineering from the University Politecnica delle Marche (IT). I obtained a PhD in Mechanical Engineering from Imperial College London. After that, I worked as Post-Doc in the Rolls-Royce Composites technology centre in the Aerospace department of the University of Bristol. After that, I was appointed Assistant Professor of Dynamics in the Mechanical Engineering department of the University of Bristol. ...
Julie Harvie is currently on sabbatical, travelling and doing part-time consulting to quench her thirst for structural dynamics. Prior to this chapter, she spent three years at VIBES.technology in the Netherlands as a project engineer and manager, using dynamic substructuring to help automotive customers solve noise and vibration problems. She also worked at Sandia National Laboratories for five years as an environments engineer, developing...
Jamie Kimberley is an Associate professor in Mechanical Engineering at New Mexico Institute of Mining and Technology. He received his B.S. in Mechanical Engineering from the State University of New York at Binghamton. Thereafter he attended the University of Illinois at Urbana–Champaign, receiving his M.S. in Theoretical & Applied Mechanics and his Ph.D. in Aerospace Engineering. Upon completion of his Doctoral degree he joined...
Gordon Shaw received a BA in chemistry in 1997 from Skidmore college and shortly thereafter began work in the semiconductor industry at EKC Technology, Inc. (now DuPont Electronic Chemicals.) Subsequently he completed a PhD in analytical chemistry in 2004 at the University of Wisconsin at Madison advised by Wendy Crone and Arthur Ellis. His dissertation work centered on the characterization of the nanometer-scale mechanical...