Session 01 Processing Modal Data (Monday Morning)
|
| 4 |
On the Role of Modal Coupling in Model Updating
|
| |
J.L. du Bois, N.A.J. Lieven, University of Bristol; S. Adhikari, University of Wales Swansea
|
| 194 |
Real Time Operating Data Expansion
|
| |
C. Chipman, P. Avitabile, University of Massachusetts, Lowell
|
| 184 |
Localisation and Curve Veering: A Different Perspective on Modal Interactions
|
| |
J.L. du Bois, N.A.J. Lieven, University of Bristol; S. Adhikari, Swansea University
|
Session 02 Acoustics I (Monday Morning)
|
| 210 |
Measuring Acoustic Source Impedance Using Wave Decomposition
|
| |
J. Liu, D.W. Herrin, University of Kentucky
|
| 2 |
Noise Reduction in Truck Cabin by Design Change of Floor Panel
|
| |
N. Okubo, T. Okumura, T. Toi, Chuo University
|
Session 03 Uncertainty Quantification of Modal Parameters (Monday Morning)
|
| 262 |
Estimating the Uncertainty in Modal Parameters Using SMAC
|
| |
T.W. Simmermacher, R.L. Mayes, Sandia National Laboratories
|
| 174 |
Bootstrap-based Estimates of Uncertainty in Operational Modal Analysis
|
| |
L.A.C.M. Aragão Filho, Instituto Militar de Engenharia; C. Magluta, N. Roitman, Universidade Federal do Rio de Janeiro - COPPE/PEC
|
| 181 |
Influence of the Measurement Mesh on the Spread of the Modal Parameters of a Stadium Grandstand, Identified Via Operational Modal Analysis Techniques
|
| |
M. Vanali, A. Caprioli, Politecnico di Milano
|
Session 04 Shock and Vibration I (Monday Morning)
|
| 119 |
Transportable Vibration Calibration System Employing E-trace Scheme
|
| |
T. Usuda, A.O. Oota, H. Nozato, Y. Hino, National Metrology Institute Japan, AIST; H. Aoyama, University of Electro-Communications
|
| 11 |
Effect of Functionally Graded Materials on Parametric Resonances of Shafts
|
| |
A. Mazzei, Kettering University; R.A. Scott, The University of Michigan
|
| 42 |
An Introduction to the Receptance Method in Active Vibration Control
|
| |
J.E. Mottershead, M.G. Tehrani, University of Liverpool; Y.M. Ram, Louisiana State University
|
Session 05 Structural Health Monitoring I (Monday Morning)
|
| 57 |
Integrated On-line Structural Health Monitoring Architecture of the Donghai Bridge
|
| |
N. Zhang, K. Veggeberg, National Instruments
|
| 80 |
Impedance-based Health Monitoring and Mechanical Testing of Structures
|
| |
L.V. Palomino, J.R.V. de Moura, Jr, K.M. Tsuruta, D.A. Rade, V. Steffen, Jr, School of Mechanical Engineering, Federal University of Uberlandia
|
| 68 |
Towards a Wireless Powering and Interrogation Strategy for Rotorcraft Health Monitoring
|
| |
J.L. du Bois, University of Bristol; N.A.J. Lieven, University of Bristol; M. Todd, University of California, San Diego
|
Session 06 Damping I (Monday Morning)
|
| 44 |
Location and Identification of Damping Parameters
|
| |
M. Prandina, J.E. Mottershead, University of Liverpool; E. Bonisoli, Politecnico di Torino
|
| 105 |
Identification of Dynamic Young's Modulus and Damping of Isotropic Plastic Materials
|
| |
P.G. Blaschke, B. Mueller-Held, HEAD acoustics GmbH
|
| 305 |
Constrained Layer Damping Treatment Design for Aircraft Landing Gear
|
| |
C. Gallimore, K. Kochersberger, R. DeVita, Virginia Polytechnic Institute and State University
|
Session 07 Experimental Techniques (Monday Afternoon)
|
| 14 |
Heat Exchanger Tube Failure Analysis via Modal and Operational Tests
|
| |
M.P. Proulx, T.F. Dowd, Boeing Commercial Airplanes
|
| 27 |
Operational Modal Analysis on a Wind Turbine Gearbox
|
| |
S. Gade, Brüel & Kjær Sound and Vibration Measurements; R. Schlombs, C. Hundeck, Brüel and Kjaer GmbH; C. Fenselau, Technology R&D
|
| 17 |
Vibration Site Survey Measurements and Combined System Modal Analysis
|
| |
T.J. Copeland, m+p international, inc.
|
| 101 |
A Simplified Dynamic Model for a Surface Mining Excavator Using Design and Experimental Data
|
| |
T.Gh. Cioara, I. Nicolae, Universitatea "Politehnica" of Timisoara; I. Cires, Rominex S.A. Timimisoa; D. Cristea, Energetical Complex Rovinari; D. Cires, Nicolaus Lenau College
|
| 126 |
Optical Non-contacting Vibration Measurement of Rotating Turbine Blades
|
| |
M.N. Helfrick, P. Pingle, C. Niezrecki, P. Avitabile, University of Massachusetts, Lowell
|
| 197 |
Shaker/Stinger Effects on Measured
Frequency Response Functions
|
| |
D. Cloutier, P. Avitabile, University of Massachusetts, Lowell; R.W. Bono, M. Peres, The Modal Shop, Inc
|
| 306 |
Solutions-based Approach for Noise Reduction in Washing Machines
|
| |
D. Barpanda, J.M. Tudor, The Dow Chemical Company
|
| 48 |
Optimal Actuator and Sensor Placement for Active Sensing
|
| |
E.B. Flynn, M.D. Todd, University of California, San Diego
|
Session 08 Acoustics II (Monday Afternoon)
|
| 115 |
Assessment of Ground-borne Vibration Impacts on Vibration-Sensitive Facilities
|
| |
B.A. Pridham, Rowan Williams Davies & Irwin (RWDI) Inc.; C. Maille, CIMA
|
| 104 |
Acoustical Relevance of Vibrating Structures
|
| |
R. Sottek, HEAD acoustics GmbH
|
| 113 |
Three Dimensional Experimental Modal Analysis on a Water Filled Cylindrical Shell
|
| |
W.K. Bonness, B. Fahnline, D.E. Capone, Pennsylvania State University
|
| 211 |
Application of the Vincent Circle to Vibro-acoustic Systems
|
| |
D.W. Herrin, G. Sampath, J. Liu, H. Song, University of Kentucky
|
| 36 |
Reducing Sound Radiation from a Plate through Tuning/Modifying Boundary Supports
|
| |
X.F. Zhang, W.L. Li, Wayne State University
|
| 212 |
Sound Field Reconstruction Using Inverse Boundary Element Method
|
| |
J. Liu, J. Han, D.W. Herrin, University of Kentucky; S. Cheah, D.G. Kato, Cummins Power Generation
|
| 219 |
Propagation of Acoustic Wave in Porous Media
|
| |
M. Khenafou, University of Oran; M. Daïri, ENSET; A. Brezini, M. Sebbani, University of Oran
|
| 167 |
Vibro-acoustic Simulations of Ships by Coupled Fast BE-FE Approaches
|
| |
D. Brunner, M. Junge, University of Stuttgart; M. Wilken, C. Cabos, Germanischer Lloyd, Hamburg; L. Gaul, University of Stuttgart
|
Session 09 Applications of Model Validation (Monday Afternoon)
|
| 152 |
VV&UQ in the NASA Standard for Models and Simulations
|
| |
L.L. Green, T.A. Zang, NASA Langley Research Center
|
| 260 |
Modal Testing Results of a Nuclear Fuel Rod and Its Model Updating
|
| |
N.G. Park, Korea Nuclear Fuel; H. Rhee, Sunchon National University; J.M. Suh, S.Y. Jeon, K.T. Kim, K.L. Jeon, Korea Nuclear Fuel
|
| 49 |
Model Validation and Response Prediction of a Flexible Rotor With Magnetic Bearing
|
| |
Q. Guo, Z. Xie, B. Zhang, L. Zhang, Nanjing University of Aeronautics & Astronautics
|
| 58 |
ISS Stage 12A Post-flight Modal Analysis, Model Validation and Correlation
|
| |
K.L. Fitzpatrick, The Boeing Company; M.S. Grygier, NASA, Johnson Space Center; T.J. Bartkowicz, The Boeing Company
|
| 204 |
Verification and Validation for Induction Heating
|
| |
K. Lam, T.B. Tippetts, Los Alamos National Laboratory; D.W. Allen, Knowledge Reef Systems, Inc
|
| 169 |
Verification and Validation for Induction Heating: Part II
|
| |
T.B. Tippetts, K. Lam, D.W. Allen, Los Alamos National Laboratory
|
| 213 |
Damping Identification From Measurements on an Industrial Structure
|
| |
B. Faverjon, LMT-Cachan; P. Ladeveze, LMT-Cachan/EADS Foundation; D. Néron, ASTRIUM-ST; V. Le Gallo, LMT-Cachan
|
| 273 |
Acoustic-structure Interaction in Rocket Engines: Validation Testing
|
| |
R.B. Davis, S.S. Joji, R.A. Parks, A.M. Brown, NASA Marshall Space Flight Center
|
Session 10 Nonlinear I (Monday Afternoon)
|
| 159 |
Active/Passive Vibration Control of Continuous Systems by Zero Assignment
|
| |
D.A. Holt, K.V. Singh, Miami University
|
| 248 |
An Overview of Some Methods of Nonlinearity Detection
|
| |
D. Hickey, K. Worden, University of Sheffield
|
| 102 |
Modal Analysis of a Nonlinear Structure with Cyclic Symmetry
|
| |
M. Peeters, A. Viguié, G. Kerschen, J.-C. Golinval, University of Liège
|
| 56 |
Review of Snap-through Phenomenon in Structures With Shallow Curvature
|
| |
G.S. Goley, P. Katona, A. Shukla, Miami University; S.M. Spottswood, U.S. Air Force Research Laboratory
|
| 51 |
Estimating the Degree of Nonlinearity in Transient Responses with Zeroed Early-time Fast Fourier Transforms
|
| |
M.S. Allen, University of Wisconsin-Madison; R.L. Mayes, Sandia National Laboratories
|
| 171 |
Spur Gear Vibration Mitigation by Means of Energy Pumping
|
| |
G. Scagliarini, University of Modena and Reggio Emilia; R. Viguié, G. Kerschen, University of Liège; F. Pellicano, University of Modena and Reggio Emilia
|
| 16 |
Efficient Computation of Joint Interface Modes
|
| |
W. Witteveen, Linz Center of Mechatronics GmbH.; H. Irschik, Johannes Kepler University
|
Session 11 Structural Health Monitoring II (Monday Afternoon)
|
| 135 |
Variation of Modal Parameter Estimates of a Prestressed Concrete Bridge
|
| |
D. Siegert, Université Paris-Est, LCPC; L. Mevel, IRISA-INRIA; E. Reynders, Katholieke Universiteit Leuven; M. Goursat, INRIA; G. De Roeck, Katholieke Universiteit Leuven
|
| 209 |
Multi-Transducer System for Energy Harvesting
|
| |
J.E. MacDonald, University of Massachusetts, Lowell; N.A. Miller, Colorado State University; W. Sifuentes, Universidad del Turabo; K.M. Farinholt, Los Alamos National Laboratory
|
| 82 |
Finite Element Model-based Feature Generation for Structural Health Monitoring
|
| |
R.J. Barthorpe, G. Manson, K. Worden, University of Sheffield
|
| 223 |
Real-time Dynamic Measurements of a Wind Turbine Rotor Blade Using Modal
Filtering
|
| |
M. Garcia, Arizona State University; G. Reich, Purdue University; Y. Zhu, University of Maryland; J. White, Purdue University
|
| 256 |
Computer Vision and Sensor Fusion for Structural Health Monitoring
Framework with Emphasis on Unit Influence Line Analysis
|
| |
R. Zaurin, F.N. Catbas, University of Central Florida
|
| 220 |
Use of a Collocated Sensor/Actuator for Dynamic Control and Structural Health Monitoring
|
| |
M. Nelis, Rose-Hulman Institute of Technology; K. Ogorzalek, University of Wisconsin-Milwaukee; A. Vázquez Ramos, University of Turabo, Gurabo; G. Park, Los Alamos National Laboratory
|
| 280 |
Impact Damage Detection and Quantification in CRFP Laminates
|
| |
M.T.H. Sultan, K. Worden, University of Sheffield; S.G. Pierce, University of Strathclyde; D. Hickey, University of Sheffield; J.M. Dulieu-Barton, University of Southampton
|
| 236 |
Wireless Hull Monitoring Systems for Modal Analysis of Operational Naval Vessels
|
| |
R.A. Swartz, A.T. Zimmerman, J.P. Lynch, University of Michigan; T.F. Brady, J. Rosario, L. Salvino, Naval Surface Warfare Center; K.H. Law, Stanford University
|
Session 12 Dynamics of Bridges (Monday Afternoon)
|
| 52 |
Frequency-veering and Mode Hybridization in Arch Bridges
|
| |
F. Benedettini, D. Zulli, R. Alaggio, University of L’Aquila
|
| 84 |
Merging Strategies for Multi-setup Operational Modal Analysis: Application to the Luiz I Steel Arch Bridge
|
| |
E. Reynders, Katholieke Universiteit Leuven; F. Magalhães, University of Porto; G. De Roeck, Katholieke Universiteit Leuven, Á. Cunha, University of Porto
|
| 157 |
Uncertainty Analysis of Voigt Bridge Modal Parameters Due to Changing Environmental Conditions
|
| |
B. Moaveni, Tufts University; X. He, DMJM Harris; J.P. Conte, University of California, San Diego; M.S. Fraser, Naval Facilities Engineering Command Southwest; A. Elgamal, University of California, San Diego
|
| 185 |
Assessment of the Effectiveness of Retrofitting Actions to a Reinforced
Concrete Bridge Using Full-scale Vibration Testing
|
| |
P. Moyo, B. Sibanda, University of Cape Town; P.D. Ronne, BKS (Pty) Ltd
|
| 186 |
Assessment of the Integrity of Shear Connectors in Composite Concrete Bridges
|
| |
P. Moyo, B. Sibanda, University of Cape Town; P.D. Ronne, BKS (Pty) Ltd.
|
| 202 |
Modal Testing of the Deteriorated Railway Plate Girder Bridge
|
| |
J.W. Kim, Semyung University; H. Jung, M.K. Hwang, University of Seoul
|
| 59 |
Finite Element Model Efficiency for Modal Analysis of Slab-on-Girder Bridges
|
| |
J.A. Warren, E.D. Sotelino, T.C. Cousins, Virginia Polytechnic Institute and State University
|
Session 13C Tutorial on Sensors and Instrumentation I (Tuesday Morning)
|
| 319 |
One Hour Tutorial
3D Scanning Vibrometry for Structural Dynamic Measurements
|
| |
D.E. Oliver, Polytec, Inc.
|
| 338 |
Effects of Aliasing and Preventing it in Test Instrumentation
|
| |
C. Gibson, VXI Technology, Inc.
|
Session 14 Structural Health Monitoring III (Tuesday Morning)
|
| 258 |
Damage Identification for Bridges Using Frequency and Time Domain Data
|
| |
A.A. Mosavi, North Carolina State University; T. Wang, H. Wang, University of Cincinnati; R. Seracino, S. Rizkalla, North Carolina State University
|
| 281 |
Damage Prognosis for Delamination of a Composite Plate
|
| |
C. Surace, Politecnico di Torino; K. Worden, University of Sheffield
|
| 228 |
Nonlinear Model Updating in Concrete Structures based on Ambient Response Data
|
| |
W. Song, S.J. Dyke, T.G. Harmon, M. So, Washington University in St. Louis
|
Session 15 Model Updating Tutorial (Tuesday Morning)
|
| 224 |
(One hour presentation)
Model Updating for Validation: A Tutorial
|
| |
S. Cogan, University of Franche-Comté
|
| 134 |
Model Updating Methods – a Comparative Study
|
| |
V. Zabel, M. Brehm, Bauhaus-University Weimar
|
Session 16 Aircraft/Aerospace (Tuesday Morning)
|
| 86 |
Dynamic Flight Characteristic Data Capture for Small Unmanned Aircraft
|
| |
W.H. Semke, K. Stuckel, K. Anderson, R. Spitsberg, B. Kubat, A. Mkrtchyan, R.R. Schultz, University of North Dakota
|
| 199 |
Structural Aspects in the Design of Military UAV
|
| |
W.G. Luber, European Aeronautic Defence and Space Company - EADS
|
| 214 |
Dynamic Characterization of Carbon Foils for Space Flight Applications
|
| |
T. Collins, New Mexico State University; R. Hodge, Rose-Hulman Institute of Technology; J. Lee, Oklahoma Christian University; A. Puckett, Los Alamos National Laboratory
|
Session 17 New Measuring Approaches and Technology Center Participation I (Tuesday Morning)
|
| 310 |
(fourty-five minute presentation)
Review of Spatial Domain Modal Parameter Estimation Procedures and Testing Methods
|
| |
D.L. Brown, R.J. Allemang, University of Cincinnati
|
| 268 |
(fourty-five minute presentation)
Continuous-scanning LDV Full-field Measurement of Vibration Deflection Shapes for Modal Analysis
|
| |
D.J. Ewins, A.B. Stanbridge, Imperial College, London; D. DiMaio, University of Bristol
|
Session 18 Damage Detection, Civil Sturctures (Tuesday Morning)
|
| 123 |
Limited Modal Information and Noise Effect on Damage Detection Without
Baseline Modal Parameters
|
| |
R. Rodriguez-Rocha, Escuela Superior de Ingeniería y Arquitectura, IPN; F.J. Rivero-Angeles, Universidad Justo Sierra; E. Gomez-Ramirez, Universidad La Salle
|
| 241 |
Damage Identification of Caissons in a Port Facility Using Ambient Vibration Measurements
|
| |
J.C. Carvajal, C.E. Ventura, H. Juarez, K. Thibert, F. Yao, University of British Columbia
|
| 233 |
Structural Damage Detection Using Matching Pursuit
|
| |
R.J. Link, D.C. Zimmerman, University of Houston
|
Session 19 Laser Vibrometry (Tuesday Afternoon)
|
| 28 |
Experimental Investigation of the Effect of Speckle Noise on Continuous Scan Laser Doppler Vibrometer Measurements
|
| |
M.W. Sracic, M.S. Allen, University of Wisconsin-Madison
|
| 283 |
New Laser Vibrometer for Single- and Multiple-point Measurements
with Compact-sized Optical Head
|
| |
G. Giuliani, S. Donati, University of Pavia
|
| 284 |
Tracking Scanning Laser Doppler Vibrometry for the Extraction of ODS on Rotating Rotor Blades
|
| |
P. Castellini, A. Di Giuseppe, A. Gasparoni, C. Santolini, Universita' Politecnica Delle Marche
|
| 285 |
Measurement and Comparison of Operational Deflection Shapes (ODSs)
Using a Scanning LDV system in Step or Continuous Scanning Mode
|
| |
D. Di Maio, D.J. Ewins, University of Bristol
|
| 286 |
Scanning Laser Doppler Vibrometry for the Characterization of the Damping Loss Factor in Honeycomb Panels
|
| |
M. Martarelli, C. Santolini, A. Sassaroli, Università Politecnica delle Marche
|
| 193 |
Comparison of 3D Laser Vibrometer and Accelerometer Frequency Measurements
|
| |
P. Pingle, J. Sailhamer, P. Avitabile, University of Massachusetts, Lowell
|
| 314 |
Effect of Tip Mass on Atomic Force Microscope Calibration by Thermal Tune Method
|
| |
M.S. Allen, University of Wisconsin-Madison; H. Sumali, Sandia National Laboratories; P.C. Penegor, University of Wisconsin-Madison
|
| 342 |
Fully Automated Robot-based 3-Dimensional Vibration Measurement System for Modal Analysis and Structural Health Monitoring
|
| |
D.E. Oliver, Polytec, Inc.; M. Schuessler, Polytec GmbH
|
Session 19D Tutorial on Sensors and Instrumentation II (Tuesday Afternoon)
|
| 321 |
One Hour Tutorial
Guidance for Measuring Mechanical Shock and Vibration
|
| |
P.L. Walter, Texas Christian University
|
| 322 |
Decoding an Accelerometer Specification Sheet – What Sensor Manufacturer’s Don’t Tell You
|
| |
D. Lally, PCB Piezotronics
|
| 337 |
One Hour Tutorial
Current status of IEEE 1451.4
|
| |
M.I. Schiefer, The Modal Shop, Inc.
|
| 345 |
Introduction to Piezoelectric Sensors
|
| |
D. Change, Dytran Instruments Inc.
|
| 327 |
Rigid Body Property Testing Using 6DOF Force Transducers
|
| |
R.W. Bono, The Modal Shop, Inc.; D. Brown, University of Cincinnati
|
| 339 |
Strain Measurement in Hostile Environments II
|
| |
V. Wnuk, HPI Hitec Products, Inc.
|
Session 20 Substructuring/Numerical Methods (Tuesday Afternoon)
|
| 61 |
Efficient Substructuring Techniques for the Investigation of Fluid-filled Piping Systems
|
| |
J. Herrmann, M. Maess, L. Gaul, University of Stuttgart
|
| 170 |
Dual Craig-bampton With Enrichment to Avoid Spurious Modes
|
| |
D.J. Rixen, Delft University of Technology
|
| 47 |
Vibration and Power Flow Analyses of Built-up Structures in a Broad Frequency Range
|
| |
H.A. Xu, W.L. Li, Wayne State University
|
| 133 |
Model Order Reduction for Thermomechanically Coupled Problems
|
| |
A.M. Steenhoek, D.J. Rixen, Delft University of Technology
|
| 67 |
Extracting Fixed Base Modal Models From Vibration Tests on Flexible Tables
|
| |
R.L. Mayes, D.L. Bridgers, Sandia National Laboratories
|
| 8 |
On Fast Computation of Effective Independence Through QR Downdating for Sensor Placement
|
| |
D.S. Li, Dalian University of Technology/University of Siegen; H.N. Li, Dalian University of Technology; C.P. Fritzen, University of Siegen
|
| 3 |
Efficient Topology Optimization for Large and Dynamically Loaded FE Models
|
| |
W. Witteveen, Linz Center of Mechatronics GmbH.; K. Puchner, MAGNA Powertrain; K. Sherif, Linz Center of Mechatronics GmbH.; H. Irschik, Johannes Kepler University Linz
|
Session 21 Model Validation and Uncertainty Quantification Tutorial (Tuesday Afternoon)
|
| 291 |
Introduction to Model Validation
|
| |
T.L. Paez, Sandia National Laboratories
|
| 292 |
Developing Adequacy Criterion for Model Validation Based on Requirements
|
| |
R.L. Mayes, Sandia National Laboratories
|
| 293 |
Probabilistic Methods in Model Validation
|
| |
T.L. Paez, L. Swiler, R.L. Mayes, Sandia National Laboratories
|
| 294 |
Epistemic Uncertainty Quantification Tutorial
|
| |
L. Swiler, T.L. Paez, R.L. Mayes, Sandia National Laboratories
|
| 295 |
Model Calibration and Correlation
|
| |
R.L. Mayes, Sandia National Laboratories
|
| 296 |
A Structural Dynamics Model Validation Example With Actual Hardware
|
| |
R.L. Mayes, A.K. Miller, W. Holzmann, D.G. Tipton, C.R. Adams, Sandia National Laboratories
|
| 19 |
Calibration Under Uncertainty Applied to Dynamic Tests of Historic Masonry Monuments
|
| |
S. Atamturktur, F.M. Hemez, B.J. Williams, C. Unal, Los Alamos National Laboratory
|
Session 22 Modal Parameter Identification I (Tuesday Afternoon)
|
| 7 |
Sensor Location for Real Time Modal Identification
|
| |
A. Girard, E. Cavro, F. Rodriguez, Intespace
|
| 34 |
Using Alias Free Polyreference to Extract Out-of-band Modes
|
| |
K.L. Napolitano, ATA Engineering
|
| 63 |
Clustering Approaches to Automatic Modal Parameter Estimation
|
| |
S. Chauhan, D. Tcherniak, Bruel & Kjaer
|
| 74 |
Application of Operational Modal Analysis and Blind Source Separation/
Independent Component Analysis Techniques to Wind Turbines
|
| |
S. Chauhan, Bruel & Kjaer Sound & Vibration Measurement A/S; M.H. Hansen, Risoe DTU National Laboratory for Sustainable Energy; D. Tcherniak, Bruel & Kjaer Sound & Vibration Measurement A/S
|
| 240 |
Identification of Surface Waves in Stiff Soil Deposits Using Ambient Vibration Measurements
|
| |
J.C. Carvajal, C.E. Ventura, K. Thibert, University of British Columbia
|
| 141 |
Parameter Identification and Optimization for Cantilevered
Piezoelectric Energy Harvesters Based on the Coupled Distributed Parameter Solution
|
| |
A. Erturk, D.J. Inman, Virginia Polytechnic Institute and State University
|
| 299 |
Automated Estimation of an Aircraft's Center of Gravity Using Static and Dynamic Measurements
|
| |
J. Cummins, A. Berning, D.E. Adams, R. Sterkenburg, Purdue University
|
Session 23a New Measuring Approaches and Technology Center Participation II (Tuesday Afternoon)
|
| 216 |
(fourty-five minute presentation)
Digital Image Correlation Applied to Structural Dynamics
|
| |
C. Niezrecki, P. Avitabile, University of Massachusetts, Lowell
|
| 231 |
(fourty-five minute presentation)
A Possible Hybrid Approach for Modal Testing of Airplanes
|
| |
C.R. Pickrel, Boeing Commercial Airplane Group
|
Session 23b Nonlinear II (Tuesday Late Afternoon)
|
| 38 |
Nonlinear Damping Estimation of Self-excited System Using Wavelet Transform
|
| |
R. Porwal, N.S. Vyas, Indian Institute of Technology Kanpur
|
| 90 |
Identification of MDOF Nonlinear System Using Genetic Algorithm Optimization
|
| |
A.C. Gondhalekar, E.P. Petrov, M. Imregun, Imperial College London
|
| 168 |
Design Procedure of a Nonlinear Vibration Absorber Using Bifurcation Analysis
|
| |
R. Viguié, G. Kerschen, University of Liège
|
| 178 |
Comparison of Order Reduction Methodologies and Identification of NNMs
in Structural Dynamic Systems with Isolated Nonlinearities
|
| |
M.A. Al-Shudeifat, E.A. Butcher, T.D. Burton, New Mexico State University
|
| 298 |
Wide-area Damage Detection in Military Composite Helicopter Structures Using Vibration-Based Reciprocity Measurements
|
| |
B.R. Zwink, D.E. Adams, R.D. Evans, D.J. Koester, Purdue University
|
Session 24 Dynamic Measurements in Buildings (Tuesday Afternoon)
|
| 121 |
Wind-induced Vibrations of Tall Buildings: The Role of Full-scale Observations in Better Quantifying Habitability
|
| |
A.C. Bentz, T.L. Kijewski-Correa, University of Notre Dame
|
| 147 |
Comparisons of Measured and Predicted Modal Properties for Steel Framed Floors
|
| |
B. Davis, University of Kentucky; T.M. Murray, Virginia Polytechnic Institute and State University
|
| 203 |
Vibration Testing and Active Control of an Office Floor
|
| |
P. Reynolds, The University of Sheffield; I.M. Díaz, Universidad de Castilla-La Mancha; D.S. Nyawako, The University of Sheffield
|
| 206 |
Effecient Modelling of High Frequency Floors
|
| |
C.J. Middleton, J.M.W. Brownjohn, University of Sheffield
|
| 238 |
Review of Generic and Manufacturer Design Criteria for Vibration-sensitive Equipment
|
| |
K.A. Salyards, R.J. Firman, III, Bucknell University
|
| 116 |
Measurement and Modeling of Footfall Vibrations in a Sensitive Laboratory Facility
|
| |
B.A. Pridham, A. Bell, S. Meszaros, Rowan Williams Davies and Irwin (RWDI) Inc.
|
| 156 |
Mode Selection for Footfall Analysis of Floors
|
| |
M. Gendreau, N. Tang, H. Amick, Colin Gordon & Associates; C.K. Wu, BAE Systems
|
Session 25 Rotating Machinery (Wednesday Morning)
|
| 69 |
Active Control in Rotating Machinery Using Magnetic Actuators with Linear Matrix Inequalities (LMI) Approach
|
| |
E.A. Perini, D.D. Bueno, E.H. Koroishi, V. Lopes, Junior, L.P. Nascimento, Sao Paulo State University (UNESP)
|
| 226 |
Identification of Torsional Vibration Features in Electrical Powered Rotating Equipment
|
| |
M.W. Trethewey, M.S. Lebold, The Pennsylvania State University
|
| 290 |
Paper Machine Rereeler Vibration: Insights Into Demanding Rotating Machinery Diagnostics
|
| |
A.B. Menon, Data Physics Corporation
|
| 304 |
Using an Operating Deflection Shape to Detect Unbalance in Rotating Equipment
|
| |
S.N. Ganeriwala, Spectra Quest, Inc.; B. Schwarz, M.H. Richardson, Vibrant Technology, Inc.
|
Session 25E Tutorial on Sensors and Instrumentation III (Wednesday Morning)
|
| 330 |
Accuracy – Real or Imagined?
|
| |
S. Swinford, Precision Filters, Inc.
|
| 331 |
One Hour Tutorial
Wireless Technology Part II
|
| |
A.L. Wicks, Virginia Polytechnic Institute and State University
|
Session 26 Substructuring/Experimental (Wednesday Morning)
|
| 287 |
On the Practical Application of Sub-structuring: A Tutorial
|
| |
P. Ind, Atomic Weapons Establishment
|
| 122 |
Decoupling Procedures in the General Framework of Frequency Based Substructuring
|
| |
W. D'Ambrogio, Università dell'Aquila; A. Fregolent, Università di Roma 'La Sapienza'
|
| 244 |
Structural Modifications With Additional DOF - Applications to Real Structures
|
| |
G. Canbaloglu, Aselsan Inc., H.N. Özgüven, Middle East Technical University
|
| 75 |
Determining the Significant Number of Singular Values in Experimental Dynamic Substructuring
|
| |
D. de Klerk, Delft University of Technology
|
Session 27 New Methods for Model Validation and Uncertainty Quantification (Wednesday Morning)
|
| 217 |
Robustness of Structural Reliability Analyses to Epistemic Uncertainties
|
| |
M. Guedri, Preparatory Engineering Institute of Nabeul (IPEIN); S. Cogan, N. Bouhaddi, University of Franche-Comté
|
| 45 |
Defining Predictive Maturity for Validated Numerical Simulations
|
| |
F.M. Hemez, H.S. Atamturktur, C. Unal, Los Alamos National Laboratory
|
| 144 |
Coupling Polynomial Chaos Expansions With Gaussian Process Emulators: An Introduction
|
| |
F.A. Diaz De la O, S. Adhikari, Swansea University
|
| 88 |
Sparse Grid Meta-Models for Model Updating
|
| |
A. Klimke, C.J. Pye, Maya HTT Ltd.
|
Session 28 Damping of Materials and Member (Tutorial) (Wednesday Morning)
|
| 107 |
Tutorial Guideline VDI 3830: Damping of Materials and Members
|
| |
L. Gaul, University of Stuttgart
|
Session 29 Tutorial on Statistics for Model Validation (Wednesday Morning)
|
| 340 |
(One hour presentation)
Statistics for Math Model Validation
|
| |
M. Fortier, General Motors Corporation
|
| 341 |
(One hour presentation)
Measurement System Analysis
|
| |
R. Rebba, General Motors Corporation
|
Session 30 Shock and Vibration II (Wednesday Morning)
|
| 148 |
An Overview of UERDTools Capabilities: A Multi-purpose Data Analysis Package
|
| |
P.A. Mantz, F.A. Costanzo, Naval Surface Warfare Center
|
| 289 |
Shock Response Spectrum - A Primer
|
| |
J.E. Alexander, BAE Systems
|
| 307 |
Pseudo Velocity Shock Spectrum Analysis Data Editing
|
| |
H.A. Gaberson, Consultant
|
| 308 |
Introduction to Shock and Vibration Isolation and Damping Systems
|
| |
A.R. Klembczyk, Taylor Devices, Inc.
|
Session 31 Dynamics of Stadium Structures (Wednesday Afternoon)
|
| 251 |
Dynamic Response Monitoring and Correlation to Crowd Movement at a Football Stadium
|
| |
F.N. Catbas, M. Gul, University of Central Florida
|
| 109 |
Finite Element Modelling and Updating of a Stadium Structure Using In-service Data
|
| |
C.A. Jones, P. Reynolds, University of Sheffield
|
| 150 |
Results From Various Sensor Types in Monitoring Stadium Vibrations
|
| |
L.M. Hanagan, The Pennsylvania State University
|
| 173 |
Aspects of Prediction Accuracy in Human-structure Interaction
|
| |
L. Pedersen, Aalborg University
|
| 264 |
Vibration Perception and Comfort Levels for an Audience Occupying a Grandstand with Perceivable Motion
|
| |
S.P. Nhleko, M.S. Williams, A. Blakeborough, University of Oxford
|
| 265 |
Ground Reaction Forces on Vibrating Structures
|
| |
S. Nhleko, T. Blakeborough, M. Williams, University of Oxford
|
| 89 |
Effect of Soil-structure Interaction on Dynamics of a Large Shaker
|
| |
E. Haag, P. Blelloch, ATA Engineering Inc.; K. Otten, V. Suarez, M. McNelis, NASA Glenn Research Center
|
Session 31F Tutorial on Sensors and Instrumentation IV (Wednesday Afternoon)
|
| 333 |
Troubleshooting of Accelerometer Sensor Installations
|
| |
S. Bill, Meggitt Sensing Systems/Endevco
|
| 334 |
One Hour Tutorial
Advanced Wireless Architectures for Synchronizing Dynamic Measurements with GPS Technology
|
| |
K. Veggeberg, National Instruments
|
| 335 |
One Hour Tutorial
Practical Considerations of Shaker Excitation Thechniques for Modal Analysis
|
| |
M.A. Peres, The Modal Shop, Inc.; P. Avitabile, University of Massachusetts, Lowell
|
| 336 |
Advanced Signal Processing Algorithms for Sound and Vibration beyond the FFT
|
| |
K. Veggeberg, National Instruments
|
Session 32 System Identification (Wednesday Afternoon)
|
| 158 |
Verification of Ultrasonically Found Dimensional and Material Properties
|
| |
D.K. Stoyko, N. Popplewell, A.H. Shah, University of Manitoba
|
| 108 |
Identification by Direct Impulse Response Fitting
|
| |
P. Vacher, A. Bucharles, B. Jacquier, ONERA
|
| 12 |
Identification of Systems Nonlinearity Structure by Harmonic Probing
|
| |
A. Chatterjee, Visvesvaraya National Institute of Technology
|
| 164 |
Frequency Domain Model Reduction Based on Principal Component Analysis
|
| |
S. Nimityongskul, D.C. Kammer, University of Wisconsin
|
| 246 |
Generation of Transfer Functions of Subsystems Using the Test Results of the Whole System
|
| |
A.R. Albooyeh, M. Saadat Foumani, M.R. Ashory, University of Semnan
|
| 146 |
Investigations of Possibilities of Improvement of a Finite Element Model of an Active Boring Bar
|
| |
T. Smirnova, Blekinge Institute of Technology; H. Åkesson, Blekinge Institute of Technology/Acticut International AB; L. Håkansson, I. Claesson, Blekinge Institute of Technology; T. Lagö, Acticut International AB
|
| 138 |
Analytical Sensitivity Analysis for Principal Components Analysis of Dynamical Systems
|
| |
D.T. Griffith, Sandia National Laboratories
|
| 76 |
Modal Analysis of a Railway Braking Resistor
|
| |
F. Braghin, G. Galli, E. Sabbioni, Politecnico di Milano
|
Session 33 Model Optimization and Updating for Validation Applications (Wednesday Afternoon)
|
| 201 |
Aeroservoelastic Design, Test, Verification and Certification of a Combat Aircraft
|
| |
W.G. Luber, European Aeronautic Defence and Space Company - EADS
|
| 91 |
A Top-down Approach to the Calibration of Computer Simulations
|
| |
J.M. McFarland, Southwest Research Institute; A. Urbina, Sandia National Laboratories; S. Mahadevan, Vanderbilt University
|
| 20 |
Predictive Maturity of Computer Models Using Functional and Multivariate Output
|
| |
S. Atamturktur, F.M. Hemez, C. Unal, B.J. Williams, Los Alamos National Laboratory
|
| 131 |
Modal Analysis Updating With an Uncertain Computational Dynamical Model and With Experiments
|
| |
E. Capiez-Lernout, C. Soize, University Paris-Est; R. Ohayon, Conservatoire National des Arts et Metiers
|
| 124 |
Optimization of the Dynamic Response of a Complete Exhaust System
|
| |
T. Lauwagie, J. Strobbe, E. Dascotte, Dynamic Design Solutions; J. Clavier, M. Monteagudo, Faurecia Exhaust System Division – R&D Center
|
| 161 |
Finite Element Model Updating using Frequency Band Averaging of Spectral Densities
|
| |
D.C. Kammer, S. Nimityongskul, University of Wisconsin-Madison
|
Session 34 Honorary Session: Dr. Thomas G. Carne (Wednesday Afternoon)
|
| 346 |
Who is that Carne guy anyway?
|
| |
D. Epp, T. Simmermacher, Sandia National Laboratories
|
| 237 |
Testing Large Structures in the Field
|
| |
G.H. James, III, NASA Johnson Space Center
|
| 297 |
Applications From Model Validation and Component Mode Synthesis
|
| |
D.R. Martinez, Mannatech Engineering, LLC
|
| 272 |
I'm Just Presenting This Paper for the Author
|
| |
R.D. Brillhart, D.L. Hunt, ATA Engineering, Inc.
|
| 276 |
|