IMAC - XXVII

Adams, C.R.
296	A Structural Dynamics Model Validation Example With Actual Hardware
Adams, D.E.
298	Wide-area Damage Detection in Military Composite Helicopter Structures Using Vibration-Based Reciprocity Measurements
299	Automated Estimation of an Aircraft's Center of Gravity Using Static and Dynamic Measurements
Adhikari, S.
144	Coupling Polynomial Chaos Expansions With Gaussian Process Emulators: An Introduction
184	Localisation and Curve Veering: A Different Perspective on Modal Interactions
4	On the Role of Modal Coupling in Model Updating
110	Bayesian Evidence for Finite Element Model Updating
Ahmadian, M.T.
72	A New Tool-holder Model for Predicting Machine Tools Dynamics
Åkesson, H.
146	Investigations of Possibilities of Improvement of a Finite Element Model of an Active Boring Bar
130	Investigation of the Dynamic Properties of a Milling Structure; Using a Tool Holder with Moderate Overhang
Alaggio, R.
52	Frequency-veering and Mode Hybridization in Arch Bridges
Albooyeh, A.R.
246	Generation of Transfer Functions of Subsystems Using the Test Results of the Whole System
Alexander, J.E.
289	Shock Response Spectrum - A Primer
Allemang, R.J.
234	Feasibility of Using Four-Post Road Simulator for Modal Analysis of a Truck Frame
310	(fourty-five minute presentation) Review of Spatial Domain Modal Parameter Estimation Procedures and Testing Methods
Allen, D.W.
204	Verification and Validation for Induction Heating
169	Verification and Validation for Induction Heating: Part II
Allen, M.S.
276	Force Reconstruction and the Sum of Weighted Accelerations Technique
51	Estimating the Degree of Nonlinearity in Transient Responses with Zeroed Early-time Fast Fourier Transforms
60	Effect of Model Order Ambiguity in Experimental Modal Analysis on Substructuring Predictions
28	Experimental Investigation of the Effect of Speckle Noise on Continuous Scan Laser Doppler Vibrometer Measurements
314	Effect of Tip Mass on Atomic Force Microscope Calibration by Thermal Tune Method
Alonso, R.
200	Nonlinear Friction Damping Measurements Over a Wide Range of Amplitudes
Al-Shudeifat, M.A.
178	Comparison of Order Reduction Methodologies and Identification of NNMs in Structural Dynamic Systems with Isolated Nonlinearities
Amer, L.
222	Initial Mechanical Stability of Cementless Highly-porous Titanium Tibial Components
Amick, H.
156	Mode Selection for Footfall Analysis of Floors
Anderson, K.
86	Dynamic Flight Characteristic Data Capture for Small Unmanned Aircraft
Aoyama, H.
119	Transportable Vibration Calibration System Employing E-trace Scheme
Aragão Filho, L.A.C.M.
174	Bootstrap-based Estimates of Uncertainty in Operational Modal Analysis
Arviso, M.
30	Uncertainty Quantification in Model Validation of a Complex Aerospace Structure
Ashory, M.R.
245	Determination of Scaled Mode Shapes in Response Only Modal Analysis
247	Optimum Configuration for Vibration Absorber in SDOF Systems Using Genetic Algorithm
246	Generation of Transfer Functions of Subsystems Using the Test Results of the Whole System
249	Optimum Configuration of Dynamic Vibration Absorber for Vibration Isolation of Beam Under Point or Distributed Loading
Ashory, M.R.A.
243	Comparative Study of Model Updating Using Base Excitation Test Data and Conventional Model Updating Method
Atamturktur, H.S.
45	Defining Predictive Maturity for Validated Numerical Simulations
Atamturktur, S.
20	Predictive Maturity of Computer Models Using Functional and Multivariate Output
19	Calibration Under Uncertainty Applied to Dynamic Tests of Historic Masonry Monuments
Avitabile, P.
335	One Hour Tutorial Practical Considerations of Shaker Excitation Thechniques for Modal Analysis
195	Condtioning of FRF Measurements for use With Frequency Based Substructuring
194	Real Time Operating Data Expansion
196	Component Mode Synthesis Using Reduced Order, Test Verified Components
216	(fourty-five minute presentation) Digital Image Correlation Applied to Structural Dynamics
197	Shaker/Stinger Effects on Measured Frequency Response Functions
193	Comparison of 3D Laser Vibrometer and Accelerometer Frequency Measurements
126	Optical Non-contacting Vibration Measurement of Rotating Turbine Blades
125	Using Full-field Vibration Measurement Techniques for Damage Detection
Awasthi, P.
21	Audio Based Fault Diagnosis Scheme for Monoblock Pumps
Baccala, L.A.
9	Padé Approximants as a Modal Identification Technique
Bada Ghar Wala, M.K.
31	Accelerated Testing and Damping
Bakhshi, A.
221	Evaluation of Isolation Table Effectiveness Under Environmental Noise
Balthazar, J.M.
10	Active Position Control of Mass Thought Shape Memory Alloys
Barbosa, A.R.
154	Uncertainty Analysis of Identified Damping Ratios in Nonlinear Dynamic Systems
Barpanda, D.
306	Solutions-based Approach for Noise Reduction in Washing Machines
Barthorpe, R.J.
82	Finite Element Model-based Feature Generation for Structural Health Monitoring
Bartkowicz, T.J.
58	ISS Stage 12A Post-flight Modal Analysis, Model Validation and Correlation
Basseville, M.
117	Transmissibility Based Damage Detection
Batterbee, D.C.
309	Finite Element Modelling of Shaken Baby Syndrome: A Frequency Response Approach
Bejarano, F.A.
93	Online Crack Detection Method for a Rotating Shaft
Bell, A.
116	Measurement and Modeling of Footfall Vibrations in a Sensitive Laboratory Facility
Bement, M.T.
225	Improving a Turning Process Using Piezoelectric Actuators
Benedettini, F.
52	Frequency-veering and Mode Hybridization in Arch Bridges
Bentz, A.C.
121	Wind-induced Vibrations of Tall Buildings: The Role of Full-scale Observations in Better Quantifying Habitability
Bernal, D.
318	ARX and Open Loop Residuals in Damage Detection
Berning, A.
299	Automated Estimation of an Aircraft's Center of Gravity Using Static and Dynamic Measurements
Bhavani Shankar, M.
87	Simulation and Experimental Validation of Automotive Components
Bill, S.
333	Troubleshooting of Accelerometer Sensor Installations
Bisaglia, C.
95	Experimental Modal Analysis and Numerical Modelling of Agricultural Vehicles
Blakeborough, A.
264	Vibration Perception and Comfort Levels for an Audience Occupying a Grandstand with Perceivable Motion
Blakeborough, T.
265	Ground Reaction Forces on Vibrating Structures
Blaschke, P.G.
105	Identification of Dynamic Young's Modulus and Damping of Isotropic Plastic Materials
Blelloch, P.
89	Effect of Soil-structure Interaction on Dynamics of a Large Shaker
Boland, D.
302	Virtual Shaker Testing for Predicting and Improving Vibration Test Performance
Bonisoli, E.
44	Location and Identification of Damping Parameters
Bonness, W.K.
113	Three Dimensional Experimental Modal Analysis on a Water Filled Cylindrical Shell
Bono, R.W.
277	Improved Low Frequency Accelerometer Calibration
197	Shaker/Stinger Effects on Measured Frequency Response Functions
327	Rigid Body Property Testing Using 6DOF Force Transducers
Borduqui, H.G.
10	Active Position Control of Mass Thought Shape Memory Alloys
Bottoni, G.
127	Determining the Rigid-body Inertia Properties of a Knee Prosthesis by FRF Measurements
Bouazara, M.
5	Study of Dynamic Behaviour of Aluminum Automotive Parts
Bouhaddi, N.
217	Robustness of Structural Reliability Analyses to Epistemic Uncertainties
Brady, T.F.
236	Wireless Hull Monitoring Systems for Modal Analysis of Operational Naval Vessels
Braghin, F.
76	Modal Analysis of a Railway Braking Resistor
95	Experimental Modal Analysis and Numerical Modelling of Agricultural Vehicles
Brehm, M.
136	Stochastic Model Updating Using Perturbation Methods Combined With Neural Network Estimations
134	Model Updating Methods – a Comparative Study
Brezini, A.
219	Propagation of Acoustic Wave in Porous Media
Bridgers, D.L.
67	Extracting Fixed Base Modal Models From Vibration Tests on Flexible Tables
Brillhart, R.D.
272	I'm Just Presenting This Paper for the Author
Brown, A.M.
273	Acoustic-structure Interaction in Rocket Engines: Validation Testing
Brown, D.L.
310	(fourty-five minute presentation) Review of Spatial Domain Modal Parameter Estimation Procedures and Testing Methods
327	Rigid Body Property Testing Using 6DOF Force Transducers
Brownjohn, J.
120	Damage Detection in Beam-like Structures Using Deflections Obtained by Modal Flexibility Matrices
Brownjohn, J.M.W.
206	Effecient Modelling of High Frequency Floors
55	Novel Experimental Characterisation of Human-induced Loading
Brunner, D.
167	Vibro-acoustic Simulations of Ships by Coupled Fast BE-FE Approaches
Bucharles, A.
108	Identification by Direct Impulse Response Fitting
Bueno, D.D.
69	Active Control in Rotating Machinery Using Magnetic Actuators with Linear Matrix Inequalities (LMI) Approach
Burton, T.D.
178	Comparison of Order Reduction Methodologies and Identification of NNMs in Structural Dynamic Systems with Isolated Nonlinearities
Butcher, E.A.
178	Comparison of Order Reduction Methodologies and Identification of NNMs in Structural Dynamic Systems with Isolated Nonlinearities
Butland, A.
196	Component Mode Synthesis Using Reduced Order, Test Verified Components
Cabos, C.
167	Vibro-acoustic Simulations of Ships by Coupled Fast BE-FE Approaches
Caicedo, J.M.
25	Computer Vision Method for Displacement Measurements of Large-scale Civil Structures
172	Multiple Solutions in Finite Element Updating
Caicedo, M.
165	High Spatial Density Mode Shape Identification Using a Mobile Sensor
Canales, G.
117	Transmissibility Based Damage Detection
Canbaloglu, G.
244	Structural Modifications With Additional DOF - Applications to Real Structures
Capiez-Lernout, E.
131	Modal Analysis Updating With an Uncertain Computational Dynamical Model and With Experiments
Capone, D.E.
113	Three Dimensional Experimental Modal Analysis on a Water Filled Cylindrical Shell
Caprioli, A.
182	Comparison of Different Serviceability Assessment Measures for Different Events Held in the G. Meazza Stadium in Milano
181	Influence of the Measurement Mesh on the Spread of the Modal Parameters of a Stadium Grandstand, Identified Via Operational Modal Analysis Techniques
230	One Year of Structural Health Monitoring of the Meazza Stadium in Milan: Analysis of the Collected Data
Carey, J.
83	Structural Health Monitoring to Detect Spinal Damage States
Carne, T.G.
278	Improving Experimental Frequency Response Function Matrices for
30	Uncertainty Quantification in Model Validation of a Complex Aerospace Structure
Carvajal, J.C.
240	Identification of Surface Waves in Stiff Soil Deposits Using Ambient Vibration Measurements
239	Ambient Vibration Testing of Multi-span Bridges With Integral Deck-abutments
241	Damage Identification of Caissons in a Port Facility Using Ambient Vibration Measurements
Castellini, P.
284	Tracking Scanning Laser Doppler Vibrometry for the Extraction of ODS on Rotating Rotor Blades
Catania, G.
303	Experimental Evaluation of the Damping Properties of Beams and Thin-walled Structures Made of Polymeric Materials
Catbas, F.N.
252	A Modified Time Series Analysis for Identification, Localization and Quantification of Damage
254	Using Dynamic Characteristics of Bridges for Practical Analysis with Distribution Factors
256	Computer Vision and Sensor Fusion for Structural Health Monitoring Framework with Emphasis on Unit Influence Line Analysis
251	Dynamic Response Monitoring and Correlation to Crowd Movement at a Football Stadium
255	Uncertainty Quantification for Structural Health Monitoring
Cavro, E.
7	Sensor Location for Real Time Modal Identification
Change, D.
345	Introduction to Piezoelectric Sensors
Chatterjee, A.
13	Crack Detection in a Cantilever Beam using Harmonic Probing and Free Vibration Decay
12	Identification of Systems Nonlinearity Structure by Harmonic Probing
Chauhan, S.
63	Clustering Approaches to Automatic Modal Parameter Estimation
74	Application of Operational Modal Analysis and Blind Source Separation/ Independent Component Analysis Techniques to Wind Turbines
234	Feasibility of Using Four-Post Road Simulator for Modal Analysis of a Truck Frame
Cheah, S.
212	Sound Field Reconstruction Using Inverse Boundary Element Method
Cheli, F.
95	Experimental Modal Analysis and Numerical Modelling of Agricultural Vehicles
Chen, J.
50	Random Response Analysis Based Model Validation and Structural Optimazation of a Vibration Fixture
Chermain, B.
23	Original Statistical Approach for the Reliability in Modal Parameters Estimation
Chipman, C.
194	Real Time Operating Data Expansion
Cho, B.H.
103	Wind Load Identification Using Wind Tunnel Test by Inverse Analysis
Cigada, M.
230	One Year of Structural Health Monitoring of the Meazza Stadium in Milan: Analysis of the Collected Data
Cioara, T.Gh.
101	A Simplified Dynamic Model for a Surface Mining Excavator Using Design and Experimental Data
Cires, D.
101	A Simplified Dynamic Model for a Surface Mining Excavator Using Design and Experimental Data
Cires, I.
101	A Simplified Dynamic Model for a Surface Mining Excavator Using Design and Experimental Data
Claesson, I.
130	Investigation of the Dynamic Properties of a Milling Structure; Using a Tool Holder with Moderate Overhang
146	Investigations of Possibilities of Improvement of a Finite Element Model of an Active Boring Bar
Clavier, J.
124	Optimization of the Dynamic Response of a Complete Exhaust System
Cloutier, D.
197	Shaker/Stinger Effects on Measured Frequency Response Functions
Coelho, L.A.B.
9	Padé Approximants as a Modal Identification Technique
Cogan, S.
217	Robustness of Structural Reliability Analyses to Epistemic Uncertainties
224	(One hour presentation) Model Updating for Validation: A Tutorial
Collini, L.
344	A Non-Destructive, Contactless Technique for the Health Monitoring of Ancient Frescoes
Collins, T.
214	Dynamic Characterization of Carbon Foils for Space Flight Applications
Conte, J.P.
153	Damage Identification of a Seven-story Reinforced Concrete Shear Wall Building Using Bayesian Model Updating
62	Uncertainty Quantification in Vibration-based Damage Assessment by Means of Model Updating
157	Uncertainty Analysis of Voigt Bridge Modal Parameters Due to Changing Environmental Conditions
154	Uncertainty Analysis of Identified Damping Ratios in Nonlinear Dynamic Systems
Copeland, T.J.
17	Vibration Site Survey Measurements and Combined System Modal Analysis
Cordeau, A.
300	Flight Flutter Testing of a Very Large Aircraft: A Discussion on Excitation and Data Analysis Techniques
Cornwell, P.
222	Initial Mechanical Stability of Cementless Highly-porous Titanium Tibial Components
Coro, A.
200	Nonlinear Friction Damping Measurements Over a Wide Range of Amplitudes
Cosenza, E.
189	Fully Automated OMA: An Opportunity for Smart SHM Systems
Costanzo, F.A.
148	An Overview of UERDTools Capabilities: A Multi-purpose Data Analysis Package
Cousins, T.C.
59	Finite Element Model Efficiency for Modal Analysis of Slab-on-Girder Bridges
Cristea, D.
101	A Simplified Dynamic Model for a Surface Mining Excavator Using Design and Experimental Data
Cummins, J.
299	Automated Estimation of an Aircraft's Center of Gravity Using Static and Dynamic Measurements
Cunha, Á.
84	Merging Strategies for Multi-setup Operational Modal Analysis: Application to the Luiz I Steel Arch Bridge
Cutini, M.
95	Experimental Modal Analysis and Numerical Modelling of Agricultural Vehicles
Daïri, M.
219	Propagation of Acoustic Wave in Porous Media
Dalpiaz, G.
32	Determining the Rigid-body Inertia Properties of Cumbersome Systems: Comparison of Techniques in Time and Frequency Domain
D'Ambrogio, W.
122	Decoupling Procedures in the General Framework of Frequency Based Substructuring
Dascotte, E.
124	Optimization of the Dynamic Response of a Complete Exhaust System
Davis, B.
147	Comparisons of Measured and Predicted Modal Properties for Steel Framed Floors
Davis, R.B.
273	Acoustic-structure Interaction in Rocket Engines: Validation Testing
de Klerk, D.
75	Determining the Significant Number of Singular Values in Experimental Dynamic Substructuring
de Moura, Jr., J.R.V.
80	Impedance-based Health Monitoring and Mechanical Testing of Structures
De Roeck, G.
135	Variation of Modal Parameter Estimates of a Prestressed Concrete Bridge
62	Uncertainty Quantification in Vibration-based Damage Assessment by Means of Model Updating
84	Merging Strategies for Multi-setup Operational Modal Analysis: Application to the Luiz I Steel Arch Bridge
Debille, J.
302	Virtual Shaker Testing for Predicting and Improving Vibration Test Performance
Decker, C.
92	The Role of Soft Tissue Damping in Spinal Vibration Analysis
83	Structural Health Monitoring to Detect Spinal Damage States
DeVita, R.
305	Constrained Layer Damping Treatment Design for Aircraft Landing Gear
Di Giuseppe, A.
284	Tracking Scanning Laser Doppler Vibrometry for the Extraction of ODS on Rotating Rotor Blades
Di Gregorio, R.
32	Determining the Rigid-body Inertia Properties of Cumbersome Systems: Comparison of Techniques in Time and Frequency Domain
127	Determining the Rigid-body Inertia Properties of a Knee Prosthesis by FRF Measurements
Di Maio, D.
285	Measurement and Comparison of Operational Deflection Shapes (ODSs) Using a Scanning LDV system in Step or Continuous Scanning Mode
Diaz De la O, F.A.
144	Coupling Polynomial Chaos Expansions With Gaussian Process Emulators: An Introduction
Díaz, I.M.
203	Vibration Testing and Active Control of an Office Floor
53	Influence of Walking and Standing Crowds on Structural Dynamic Properties
Dick, A.J.
97	Wideband Characterization of the Shock and Vibration Response of Impact-Loaded Structures
DiMaio, D.
268	(fourty-five minute presentation) Continuous-scanning LDV Full-field Measurement of Vibration Deflection Shapes for Modal Analysis
Dodson, J.C.
97	Wideband Characterization of the Shock and Vibration Response of Impact-Loaded Structures
Dohrmann, C.R.
278	Improving Experimental Frequency Response Function Matrices for
Dolan, R.
83	Structural Health Monitoring to Detect Spinal Damage States
Donati, S.
283	New Laser Vibrometer for Single- and Multiple-point Measurements with Compact-sized Optical Head
Dowd, T.F.
14	Heat Exchanger Tube Failure Analysis via Modal and Operational Tests
du Bois, J.L.
68	Towards a Wireless Powering and Interrogation Strategy for Rotorcraft Health Monitoring
184	Localisation and Curve Veering: A Different Perspective on Modal Interactions
4	On the Role of Modal Coupling in Model Updating
Dulieu-Barton, J.M.
280	Impact Damage Detection and Quantification in CRFP Laminates
Dyke, S.J.
228	Nonlinear Model Updating in Concrete Structures based on Ambient Response Data
Elgamal, A.
157	Uncertainty Analysis of Voigt Bridge Modal Parameters Due to Changing Environmental Conditions
Emory, B.H.
282	Modal Testing and Modeling of a Simplified Elevator System
Epp, D.
346	Who is that Carne guy anyway?
Erturk, A.
141	Parameter Identification and Optimization for Cantilevered Piezoelectric Energy Harvesters Based on the Coupled Distributed Parameter Solution
Evans, R.D.
298	Wide-area Damage Detection in Military Composite Helicopter Structures Using Vibration-Based Reciprocity Measurements
Ewins, D.J.
285	Measurement and Comparison of Operational Deflection Shapes (ODSs) Using a Scanning LDV system in Step or Continuous Scanning Mode
200	Nonlinear Friction Damping Measurements Over a Wide Range of Amplitudes
268	(fourty-five minute presentation) Continuous-scanning LDV Full-field Measurement of Vibration Deflection Shapes for Modal Analysis
Fabbrocino, G.
189	Fully Automated OMA: An Opportunity for Smart SHM Systems
Fahnline, J.B.
113	Three Dimensional Experimental Modal Analysis on a Water Filled Cylindrical Shell
Faria, C.T.
10	Active Position Control of Mass Thought Shape Memory Alloys
Farinholt, K.M.
209	Multi-Transducer System for Energy Harvesting
Faverjon, B.
213	Damping Identification From Measurements on an Industrial Structure
Fenselau, C.
27	Operational Modal Analysis on a Wind Turbine Gearbox
Fetter, R.
302	Virtual Shaker Testing for Predicting and Improving Vibration Test Performance
Fiorati, S.
32	Determining the Rigid-body Inertia Properties of Cumbersome Systems: Comparison of Techniques in Time and Frequency Domain
Firman, III, R.J.
238	Review of Generic and Manufacturer Design Criteria for Vibration-sensitive Equipment
Firth, D.R.
328	Ground Loop Problems with Measurement Systems and How to Avoid Them
Fischer, O.
218	Long-term Observation of Old RC Structures Using Dynamic Response
Fitzpatrick, K.L.
58	ISS Stage 12A Post-flight Modal Analysis, Model Validation and Correlation
Flynn, E.B.
48	Optimal Actuator and Sensor Placement for Active Sensing
Foley, J.R.
97	Wideband Characterization of the Shock and Vibration Response of Impact-Loaded Structures
143	A New Non-oscillatory Numerical Approach for Structural Dynamics and Wave Propagation in Solids
Fortier, M.
340	(One hour presentation) Statistics for Math Model Validation
Frangopol, D.M.
255	Uncertainty Quantification for Structural Health Monitoring
Fraser, M.S.
157	Uncertainty Analysis of Voigt Bridge Modal Parameters Due to Changing Environmental Conditions
Fregolent, A.
122	Decoupling Procedures in the General Framework of Frequency Based Substructuring
Friswell, M.I.
110	Bayesian Evidence for Finite Element Model Updating
Fritzen, C.P.
8	On Fast Computation of Effective Independence Through QR Downdating for Sensor Placement
Fujii, Y.
98	Dynamic Error Correction of Force Sensor
Gaberson, H.A.
307	Pseudo Velocity Shock Spectrum Analysis Data Editing
Gade, S.
27